Kyocera KM-C3232E C2525E/C3225E/C3232E/C4035E Operation Guide Rev-1.0 (Advance - Page 74

Copy Functions Job Build Job Build allows you to scan originals in several separate steps and copy at once. In each step of the scanning process you can specify different settings (such as zooming and border erase) and you can specify different types of originals. Other examples include inserting a blank sheet between sets of copies from each step and specifying a front cover page during a duplexing step. Job Build Procedure This procedure describes how to use a job build for the following example. Example Pages marked with * are blank, pages shown in gray are colored paper. NOTE: In this example, color paper to be used for the cover page is set in the MP tray and regular paper is loaded in Cassette 1. Open the Job Build Screen. Step 1: 1 Press the Job Build key. 1-58 Settings Common to All Steps Sets Duplexing and Repeat Copy. NOTE: Set Repeat Copy to increase number of sets later as needed. Other settings not used in this example may also be configured here. For further details, refer to Setting Functions on page 1-62.