Kyocera KM-C3232E C2525E/C3225E/C3232E/C4035E Operation Guide Rev-1.0 (Advance - Page 158

Scanner Settings Batch Scanning Configure batch scanning for default settings mode. The setting items are as follows. Item On Off Description Enables batch scanning. Disables batch scanning. For further details on batch scanning, refer to page 4-8. 1 Referring to Accessing the Setting default function Screen on page 4-12, access the Setting default function screen. 2 Press [S] or [T] to select Batch Scanning and press [Change #]. 3 Select [On] or [Off]. 4 Press [Close]. The display returns to the Setting default function screen. One Page Per File Configure One Page Per File for default settings mode. The setting items are as follows. Item On Off Description Enables One Page Per File. Disables One Page Per File. For further details about One Page Per File, see page 4-9. 1 Referring to Accessing the Setting default function Screen on page 4-12, access the Setting default function screen. 2 Press [S] or [T] to select One Page Per File (Output Each Page) and press [Change #]. 3 Select [On] or [Off]. 4 Press [Close]. The display returns to the Setting default function screen. File Name Set the scanner image filename for default settings mode. NOTE: Enter the filename using less than 16 characters. For further details on scanner image file name, refer to page 4-5. 1 Referring to Accessing the Setting default function Screen on page 4-12, access the Setting default function screen. 2 Press [S] or [T] to select File Name and press [Change #]. 3 Press [Change]. 4 Enter the filename and press [End]. 5 Press [Close]. The display returns to the Setting default function screen. 4-16