Kyocera KM-C3232E C2525E/C3225E/C3232E/C4035E Operation Guide Rev-1.0 (Advance - Page 150

Scanner Settings Border Erase Removes black borders from around the edges of originals. Function Sheet Erase (Border Erase) Value Inch models Border: 0 - 2" (1/8" increments) Description Use this mode to erase black borders around single sheet originals. Book Erase Individual BorderErase (Individual Erase Mode) Metric models Border: 0 - 50 mm Inch models Border: 0 - 2" (1/8" increments) Center: 0 - 2" (1/8" increments) Metric models Border: 0 - 50 mm Center: 0 - 50 mm Inch models Top: 0 - 2" (1/8" increments) Bottom: 0 - 2" (1/8" increments) Left: 0 - 2" (1/8" increments) Right: 0 - 2" (1/8" increments) Use this mode to erase black borders that develop around the edges and in the middle when scanning originals such as thick books. You can specify the widths individually to erase the borders around the edges and in the center of the book. Use this mode to individually specify border widths to erase on all sides. Metric models Top: 0 - 50 mm Bottom: 0 - 50 mm Left: 0 - 50 mm Right: 0 - 50 mm Off Do not erase borders. NOTE: See Border Erase on page 1-19 for how to configure Border Erase. Batch Scanning After scanning an original, you can continue scanning a new original. When this feature is enabled, after an original is scanned, a selection screen prompts whether to continue scanning originals. Item On Off Description Enables batch scanning. Disables batch scanning. NOTE: For TWAIN image scanning, batch scanning is available when Wait for Scan is enabled. Auto Selection Scan differently sized originals in one operation when placed in the optional document processor. Item On Off Description Enables Auto Selection. Disables Auto Selection. NOTE: For Auto Selection operation, see Auto Selection Mode on page 1-46. 4-8