Kyocera KM-C3232E C2525E/C3225E/C3232E/C4035E Operation Guide Rev-1.0 (Advance - Page 290

System Menu Hard Disk Management Verify available hard disk space and delete invalid data from the Hard Disk Management screen. Perform the following steps. 1 Press the System Menu/Counter key. 2 Press [BOX Management] ([Hard Disk m Menu / Counter Management]). Printer Default Document Management Language MP tray Setting Register Orig. Size Job Accounting BOX Management Print Report End Check the counter User Adjustment 3 Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the 25/25 ppm model, 3200 for the 32/25 and 32/32 ppm models and 4000 for the 40/35 ppm model. If the correct code has been entered, the HDD management mode (HDD management) screen will be displayed. NOTE: For security, it is recommended to change the management code. For further details, refer to Changing Management Code on page 7-25. If the optional security kit has been installed, the management code is 8 digits long. The default setting is 25002500 for the 25/25 ppm model, 32003200 for the 32/25 and 32/32 ppm models and 40004000 for the 40/35 ppm model. 4 To verify available hard disk space or total capacity, press [On] below Check Hard Disk Capacity (on the left side of the screen). To delete invalid data, press [On] below Delete invalid data (on the right side of the screen). NOTE: When the optional security kit is installed, Format Hard Disk is displayed. For further details, refer to the optional security kit Operation Guide. 5 Press [Close]. 6 Press [Close]. The display is returned to the System Menu screen. 7-42