Kyocera KM-C3232E C2525E/C3225E/C3232E/C4035E Operation Guide Rev-1.0 (Advance - Page 154

Scanner Settings Scanner Default Settings Change the default settings for the scanner function. Default Settings This section explains how to change default settings which are applied when the machine is powered up or the Reset key is pressed. Automatically configured details set in default setting mode are called default settings. You can change the default settings as desired to meet your usage patterns. Accessing the Setting default function Screen Follow the steps below to display the Setting default function screen. 1 Press the System Menu/Counter key. 2 Press [Scanner Default]. System Menu / Counter System Menu Copy Default Scanner Default Machine Default Printer Default Document Management Language MP tray Setting Register Orig. Size Job Accounting BOX Management Print Report 3 Use the numeric keys to enter the 4 digit management code. The default setting is 2500 for the 25/25 ppm model, 3200 for the 32/25 and 32/32 ppm models and 4000 for the 40/35 ppm model. If the correct management code has been entered, the Scanner setting menu screen is displayed. NOTE: For security, it is recommended to change the management code. For further details, refer to Changing Management Code on page 7-25. If the optional security kit has been installed, the management code is 8 digits long. The default setting is 25002500 for the 25/25 ppm model, 32003200 for the 32/25 and 32/32 ppm models and 40004000 for the 40/35 ppm model. 4 Press [Func. Def. setting]. System Menu / Counter Scanner setting menu System Basic Func. Def. setting. User registr. System Menu 5 Refer to the following configuration items to configure the default settings. 4-12