Kyocera KM-C3232E C2525E/C3225E/C3232E/C4035E Operation Guide Rev-1.0 (Advance - Page 51

Copy Functions Proof Copy 1 Make a test copy of a single set to verify settings before printing the remaining sets. If a problem is found, avoid wasting paper canceling the remaining copy job. Follow the steps below to do a Proof copy job. Press [Function] and then press [T Down]. 2 Press [Proof Copy] ([Test Copy]). 3 Press [On]. Ready to Proof Copy. Proof Copy ( Full-Color ) Shortcut Paper Size 11×8 100% Back Off Proof copy outputs one set for proo On 4 Place the original and press the Start key. The proof copy begins. 5 After printing a single test copy, a confirmation screen will be displayed, and the copier will remain in standby mode until the job is approved or cancelled. Check the proof copy. If it is acceptable, press the Start key. The remaining sets will be printed. Check proof copy. To stop and retry, press "Cancel" key. To continue to print, press "Start" key. Orig. Page Count/Set 11×8½" 1 sided APS Top Edge 11×8½" Color, 1 side Plain To change the copy quantity, press Job [Change Preset] and change the copy count. If there is a problem with the copy, press [Cancel] to redo the copy settings. Output Top tray Change Preset 1-35