Kyocera KM-C3232E C2525E/C3225E/C3232E/C4035E Operation Guide Rev-1.0 (Advance - Page 121

Printer Settings Handling Memory Devices You can use three types of memory devices with this device: memory card, optional hard disk, or RAM disk. Use memory card and hard disk by installing into the printer's provided slots. Use RAM disk by assigning a portion of the printers memory to RAM disk mode. The basic usage of each type of memory is the same. Here, memory device usage is explained using a memory card. Memory Card Operation This device has a memory card slot. Save fonts to a memory card to print using other than the internal fonts or to save or read print data. Use a memory card with this device to enable the following operations. • Memory Card Format (Initialization) • Write Data • Read Data (data, fonts, programs, or macros) • Delete Data • Print List of Partitions Inserting the Memory Card NOTE: Always switch off ({ posion) the main power switch when removing or inserting a memory card. 1 Remove the memory card cover from the interface cover and attach the memory card cover to the memory card. 2 Hold the memory card cover and insert the memory card with the label face upward into the memory card slot until the memory card stops. NOTE: Use the memory card with the memory card cover attached. Replace the memory card cover after the memory card is used. Memory Card Format (Initialization) Before using a new memory card, the card must first be formatted. Formatting prepares the card for data to be written to it. NOTE: Format the memory card at the device. 1 Press the Printer key. 3-27