Yamaha CS1D Owner's Manual - Page 112
INPUT COMP LIBRARY popup window, COMP LIBRARY button.
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
[Procedure] 1. Use the INPUT block [SEL] switches or the ST IN block [L]/[R] switches to select the input channel that you wish to control. 2. In the LCD FUNCTION ACCESS block, press the INPUT [GATE/COMP] switch several times to access the following COMP PRM screen. Chapter 4. Basic operation for input channels • INPUT COMP LIBRARY popup window Library list This list shows the input compressor data that has been stored in memory. The highlighted row is currently selected for operations. LCD FUNCTION ACCESS block INPUT [GATE/COMP] switch In the COMP PRM screen you can make compressor settings for the currently selected input channel. • COMP PRM screen 3. In the upper right of the screen, click the INPUT COMP LIBRARY button. The following INPUT COMP LIBRARY popup window will appear. In this window you can store input channel compressor settings (input compressor data) in the library, or recall (load) existing data from the library. Edit section This shows the settings of the input compressor data currently selected in the library list. These buttons are used for Store or Recall operations. 4. From the library list, select data that uses the desired type. When you click a row in the library list, that row will be highlighted, and the compressor type used in that data and the parameter settings will be displayed in the edit section. Hint Rows numbered 01-34 are displayed as "READ ONLY," and contain read-only preset data. Initially, it is a good idea to recall preset data that is close to the settings you wish, and then modify the parameters as necessary. 5. Click the RECALL button located in the lower left of the library list. The data you selected in step 4 will be recalled into the input channel you selected in step 1. You will exit the INPUT COMP LIBRARY popup window and return to the previous COMP PRM screen. Hint If a ST IN channel or either input channel of a pair is selected, the same data will be loaded into both channels. In the COMP PRM screen, you can also select the key-in signal (the reference signal that operates the compressor), and select either LPF or HPF as the filter that processes the input signal of the compressor. For details refer to "CS1D Reference Manual (Software)" (→p.142). 53