Yamaha CS1D Owner's Manual - Page 495

Input functions LCR [Function] Make settings for LCR mode to allow three-channel playback, with a CENTER channel added to the L/R channels of the STEREO bus. ■ Console In the LCD FUNCTION ACCESS block, press the INPUT [PAN/ ROUTING] switch (press repeatedly until the screen shown at the right appears) ■ Display MENU button → INPUT PAN/ ROUTING button → LCR tab [Screen functions] 1 243 1 CENTER BUS CONTROL When this button is on, the STEREO B channel will function as the CENTER channel. By adding the CENTER channel to the L/R channels of the STEREO A bus, you can implement threechannel playback. When this button is off, the CENTER channel signal will no longer be sent to STEREO B, meaning that it will not be output externally. (The same LR signal as STEREO A will be sent to STEREO B.) However even when the CENTER BUS CONTROL button is off, you can operate LCR pan for channels in which LCR mode is turned on. (When you turn the button on, the LCR setting will immediately take effect.) 2 LCR (LCR mode on/off) For each input channel/ST IN channel, turn LCR mode on/off. For channels whose LCR mode is on, you can use the INPUT [PAN] encoder on the CS1D top panel to simultaneously control the level of the L/R channels and the CENTER channel. Hint On channels for which LCR mode on, rotating the [PAN] encoder will cause the perimeter LEDs to light as follows. 160