Yamaha CS1D Owner's Manual - Page 234
ST IN fader, When the FADER FLIP [CH] switch is on, In the SELECTED INPUT CHANNEL block FADER
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
DCA 10 1 2 3 5 4 5 I 6 0 7 8 9 5 10 11 12 10 20 RCL J 30 MUTE SAFE K 40 50 60 H L CUE H ST IN fader This is a 100 mm fader that adjusts the input level of each ST IN channel. The adjustable range is - ∞ dB - +10 dB. Hint In the SELECTED INPUT CHANNEL block FADER FLIP section, you can exchange (flip) the functions of the ST IN fader (H) and the ST IN [MIX] encoder (2) as shown in the following illustrations. ST IN block • When the FADER FLIP [CH] switch is on If a VARI type MIX bus is selected, this encoder will adjust the send level to that MIX bus. If a FIX type MIX bus is selected, only the LED at the ® position will light, and the encoder will be disabled. This indicates the on/off status of the signal that is sent from the ST IN channel to the currently selected MIX bus. L STATUS R MIX 0 10 ON PAN L TO ST R +48V INS A B INPUT GAIN +10 -68 L CLIP R + L THR - SEL COMP + R THR - SEL GATE This turns the ST IN channel on/off. ON CLIP 6 12 18 30 60 This adjusts the input level of the ST IN channel. DCA 10 1 2 3 20 RCL 30 MUTE SAFE 40 50 60 CUE • When the FADER FLIP [MIX] switch is on L STATUS R This adjusts the input level of the ST IN channel. This indicates the on/off status of the ST IN channel. MIX 0 10 ON PAN L TO ST R +48V INS A B INPUT This is an on/off switch for the signal that is sent from the ST IN channel to the currently selected MIX bus. If a VARI type MIX bus is selected, this fader will adjust the send level to that MIX bus. If a FIX type MIX bus is selected, the fader will be fixed at the 0 dB position and will have no effect. GAIN +10 -68 L CLIP R + L THR - SEL COMP + R THR - SEL GATE ON CLIP 6 12 18 30 60 DCA 10 1 2 3 20 RCL 30 MUTE SAFE 40 50 60 CUE 17