Yamaha CS1D Owner's Manual - Page 378

You must first switch the EVENT RECALLING button to "DISABLE." If you format a card using a PC, format it as FAT16. The CS1D supports only FAT16 and FAT12. In order to store all data of the PM1D, you must use a PC ATA storage card that has 32 Mbytes or more of free area. The following characters cannot be used in a filename. They will be ignored if you attempt to input them. (Also, the SPACE character is unusable only at the beginning of the filename.) (SPACE) \ / : *?" It is not possible to PASTE the filename into the FILE SAVE popup window. [Procedure] Loading a file from memory card 1. Insert a PC ATA flash storage card into [PC] card slot A or B, located on the top panel of the CS1D. 2. Access the UTILITY function LOAD/SAVE screen. 3. From the list shown at the right, select the file that you wish to load, and click it. The cursor will move to that line. 4. Click the LOAD button. The file you selected in steps 3 will be loaded from the memory card into the PM1D system. Once you have pressed the button to execute this operation, never insert or remove a memory card in the PC ATA storage card slot or turn off the power of the CS1D. Doing so may damage the file. Please be aware that the switches in the LCD function section of the CS1D can not be operated while the operation is executing. If the file being loaded has a type of ALL/COMPOSITE, all or part of the PM1D scene memories/ libraries may be rewritten unexpectedly. Be sure that you do not inadvertently erase important scenes or libraries. If the EVENT RECALLING button is set to "ENABLE" in the TC EVENT screen of the MIDI/ GPI/TC function, the LOAD button will be grayed and loading will not be possible. You must first switch the EVENT RECALLING button to "DISABLE." Be aware that if you press the [STOP] button while a scene memory is being loaded, all settings that would have been loaded will be cleared. UTILITY functions 43 MON/CUE METER SYS/W.CLOCK UTILITY MIDI/GPI/TC SCENE GEQ EFFECT