Yamaha CS1D Owner's Manual - Page 145

CS1D Operating Manual (Basic Operation) Inserting into an input channel Here's how an external device connected to an input/output unit can be inserted into an input channel. [Procedure] 1. In the LCD FUNCTION ACCESS block, press the INPUT [PATCH] switch several times to access the following INSERT PATCH screen (IN PATCH function). • INSERT PATCH screen (IN PATCH function) LCD FUNCTION ACCESS block INPUT [PATCH] switch In the INSERT PATCH screen (IN PATCH function), patch an output jack to the insert out point in the left half of the screen, and patch an input jack to the insert in point in the right half of the screen. Number of the input channel Name of the input channel From above, this indicates the type and number of the output unit, the card slot number , and the channel number of the output jack. To patch the desired output jack to the insert out of an input channel, click this grid to display a "●" symbol. Number of output jacks that are patched to the insert out of that channel From above, this indicates the type and number of the input unit, the card slot number, the channel number of the input jack, and the number of input channels that are patched to that jack. To patch the desired output jack to the insert in of an input channel, click this grid to display a "●" symbol. 2. In the left half of the screen, click the grid at which the output jack connected to the external device intersects with the desired input channel. 3. In the right half of the screen, click the grid at which the input jack connected to the external device intersects with the desired input channel. With these settings, the input/output jacks connected to the external device will be patched to the corresponding input channel. (However, you should be aware that the insertion will not actually be enabled until the INS. button is turned on in the following INSERT/DIRECT OUT screen.) 86