Yamaha CS1D Owner's Manual - Page 454

IN HA/INSERT IN PATCH Hint If PATCH CONFIRMATION is turned on in the UTILITY function PREFERENCE screen, a popup window will ask you for confirmation each time you attempt to change the patch settings. IN PATCH functions By clicking the buttons at either end of the input unit/slot line, you can switch the display by units. By clicking the buttons you can switch the display by slots. 7 ASSIGN This displays the total number of channels that are patched to each input jack. Input jacks patched in other screens will be counted even if they are not patched in this screen. However, key-in signals that are patched will not be counted. You can patch a single input jack to multiple input channels, but you cannot patch multiple input jacks to a single input channel. 5 AUTO SETUP button This button patches input channels starting from channel 1 to the currently-connected input units. At this time, the effect returns will be assigned to ST IN. When you press the AUTO SETUP button, a popup window will appear. 8 8 PATCH LIBRARY button This button is used to access the PATCH LIBRARY window in which you can save/load the patch status as a library (→p.172). IN EQ IN GATE/COMP IN DELAY IN CH VIEW PAN/ROUTING IN DCA/MUTE If you click OK, AUTO SETUP will be executed to perform the patches automatically. 6 7 6 INPUT UNIT/SLOT/CH (input unit/slot/channel) In order from the top, these are the type and ID number of the input unit, slot number, and input jack channel number. The abbreviations displayed in the input unit line indicate the following. • INx (DIO8).........DIO8 digital input/output unit (x is the unit ID number) • INx (AI8 AI8 analog input unit (x is the unit ID number) • 2TR IN Input signal from one of the 2 TR IN connectors 1-6 on the rear panel of the CS1D console • TB Talkback signal • EFF RTN Return signal to internal effect 1-8 119