Yamaha CS1D Owner's Manual - Page 151
following INSERT/DIRECT OUT screen IN, POST FADER
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
CS1D Operating Manual (Basic Operation) Number of the input channel From the top, this shows the type and number of the output unit, the slot number of the card, and the channel number of the output jack. Name of the input channel To patch the direct out point of a channel to the desired output jack, click this grid to display a "●" symbol. Number of output jacks that are patched to the direct out point of that channel 2. Click the grid at which the input channel intersects with the output jack that you wish to use as the direct output. 3. In the LCD FUNCTION ACCESS block, press the INPUT [PATCH] switch several times to access the following INSERT/DIRECT OUT screen (IN PATCH function). In the INSERT/DIRECT OUT screen (IN PATCH function) you can switch insertion on/off for each input channel. Here you can also select the insert I/O point (the position at which the external device is inserted), and the direct out point (the position from which direct output is taken). • INSERT/DIRECT OUT screen (IN PATCH function) Number of the input channel Turn insert on/ off for each Short name of the input channel. channel Specify the insert I/O point for each channel. Specify the direct out point for each channel 4. Use the on-screen buttons to select one of the following as the direct out point (the location in the signal patch from which the direct out signal will be taken). • PRE EQ Immediately before the EQ • PRE FADER........Immediately before the fader • POST FADER .....Immediately after the fader • POST ON............Immediately after the [ON] switch Hint The direct point can also be selected in the IN PATCH function INSERT/DIRECT POINT screen, or in the INSERT/DIRECT VIEW screen. 92