Yamaha CS1D Owner's Manual - Page 164

Chapter 8. Scene memory Directly recalling a scene Frequently-used scenes can be assigned to the SCENE MEMORY [1]-[12] switches of the SCENE MEMORY block, and directly recalled at one touch. [Procedure] 1. In the LCD FUNCTION ACCESS block, press the [SCENE] switch several times to access the following screen. LCD FUNCTION ACCESS block [SCENE] switch 4. Click the ASSIGN button. The scene you selected in step 3 will be assigned to the switch whose number you selected in step 2. 5. Repeat steps 2-4 to assign the desired scenes to the SCENE MEMORY [1]-[12] switches. 6. In the MODE section at the upper left of the screen, make sure that the DIRECT RECALL button is on. (If it is off, click the DIRECT RECALL button.) If the DIRECT RECALL button is on, the SCENE MEMORY [RECALL] LED in the SCENE MEMORY block of the console will light, and the SCENE MEMORY [1]-[12] switches will function as direct recall switches to directly recall the twelve assigned scenes. • DIRECT RECALL screen (SCENE function) Hint The function of the SCENE MEMORY [1]-[12] switches can also be specified in the IN DCA/MUTE function MUTE GROUP ASSIGN screen, and the OUT DCA/MUTE function MUTE GROUP ASSIGN screen. 7. Press one of the SCENE MEMORY [1]-[12] switches in the SCENE MEMORY block of the console. The corresponding switch LED will light, and the scene assigned to that switch will be recalled. DIRECT RECALL ASSIGN list SCENE MEMORY list In the SCENE function DIRECT RECALL screen, you can assign scenes to the SCENE MEMORY [1]- [12] switches. 2. In the DIRECT RECALL ASSIGN list at the left side of the screen, click the line for the switch number to which you wish to assign a scene. The highlighted area will move to the selected line. 3. In the SCENE MEMORY list, click the line that shows the desired scene to select it. The cursor will move to that line. Use the scroll bar located at the right of the list to view scenes that are not currently visible. 105