Yamaha CS1D Owner's Manual - Page 166

Chapter 9. Recall safe/Mute safe If Recall Safe is specified for either (not both) the odd-numbered or even-numbered channel of two channels, and you recall a scene in which these two channels are paired, pairing will be forcibly defeated, and the channel that was set to Recall Safe will maintain the state prior to the recall. Using the screen to set/defeat Recall Safe Recall Safe can also be set/cancelled from within the display. With this method, you can not only set/cancel Recall Safe, but also select the parameters to which Recall Safe will apply. Furthermore, you can select not only input channels or output channels, but also DCA groups, internal effects, graphic EQ, and mute masters as objects for the recall. [Procedure] 1. In the LCD FUNCTION ACCESS block, press the [SCENE] switch several times to access the following RECALL SAFE screen (SCENE function). LCD FUNCTION ACCESS block [SCENE] switch • RECALL SAFE screen (SCENE function) • ST A/B STEREO A/B channels • DCA 1-12 DCA groups 1-12 • GEQ 1-24 Graphic EQ modules 1-24 • EFFECT 1-8 Internal effects 1-8 • MUTE MASTER...... Turn all mute groups on/off For the INPUT, ST IN, MIX, MTRX, and STEREO A/B channels, you can specify Recall Safe not only for the entire channel, but for individual parameters. The following parameters can be selected. • ALL All parameters of that channel • ATT The ATT parameter of that channel • EQ The EQ parameters of that channel (except ATT) • FADER The fader of that channel (includes BALANCE for STEREO A/B) • SEND/TO MTRX .... The SEND/TO MATRIX parameters of that channel (ON, LEVEL, PAN, PRE/ POST, PAN, PRE POINT) • UNIT The parameters of the unit patched to that channel (HA GAIN GANG and HA A/B LINK are included in ALL) Hint By clicking one of the SET ALL buttons located at the bottom of the screen, you can set all channels, all specified parameters, or all units to Recall Safe status. 2. Of the buttons arranged in the screen, turn on the SAFE ON/OFF buttons for the channels/parameters that you wish to set to Recall Safe. In the RECALL SAFE screen, click the SAFE ON/ OFF buttons to select the channels/parameters that you wish to set to Recall Safe. The following elements correspond to each button. • CH 1-96 {1-48} ........Input channels 1-96 {1-48} • ST IN 1-8 {1-4}........ST IN channels 1-8 {1-4} • MIX 1-48 MIX channels 1-48 • MTRX 1-24 MATRIX channels 1-24 • If the SET ALL button is on, all units (including those not displayed in this screen) will be set to Recall Safe. Be aware that units that are not currently patched and units that are patched to Insert will also be set to Recall Safe. • Simply turning on the above buttons does not enable the Recall Safe function. To enable Recall Safe, you must turn on the SAFE ON/OFF button for the corresponding channel. • As an exception to this, Unit Recall Safe is independent of Channel Recall Safe. For this reason, simply turning on the UNIT button will exclude the corresponding unit from recall operations even if the SAFE ON/OFF button is off. Channels/parameters whose buttons are turned on will be set to Recall Safe. With this setting, these channels/ parameters will not be affected even if a scene is recalled. 107