Yamaha CS1D Owner's Manual - Page 279
EQUALIZER EQ [Q] encoder and LEDs
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
CS1D Reference Manual (Hardware) EQUALIZER section This section sets the internal six-band EQ (HIGH, HIGH MID, MID, LOW MID, LOW, SUB LOW). Of the six bands, HIGH and SUB LOW EQ can be switched between shelving and peaking types. In addition, the HIGH band can function as an LPF, and the SUB LOW can function as an HPF. 2 34 5 61 HIGH LOW 9 8 SUB LOW 7 EQ ON EQUALIZER 1 EQ [LPF] switch and LED (HIGH band only) This switch changes the HIGH band EQ type to LPF. When LPF is selected, the switch LED will light. In this case, the [Q]/[GAIN] encoders of the HIGH band will have no effect, and the perimeter LEDs will be displayed. 2 EQ [BYPASS] switch and LED This switch bypasses each EQ band. When bypassed, the switch LED will light. 3 EQ [ ] switch and LED (HIGH band only) This switch changes the HIGH band to high-shelving. The switch LED will light when high-shelving is selected. In this case, the HIGH band [Q] encoder will have no effect, and the perimeter LEDs will be displayed. 4 EQ [Q] encoder and LEDs This encoder sets the Q (steepness) of each band. Rotating it toward the right will make the Q gentler, and rotating it toward the left will make the Q sharper. The range is 10.0-0.10 (41 steps) for each band. The current approximate value is shown by the perimeter LEDs. 5 EQ [F] encoder, [VALUE] indicator, and [Hz]/[kHz] LEDs This encoder sets the center frequency of each band. The range is 20 Hz - 20 kHz (121 steps) for each band. The current value is shown by the [VALUE] indicator, and either the [Hz] or [kHz] indicators will light to indicate the units of the displayed value. 6 EQ [GAIN] encoder and LEDs This encoder sets the gain of each band. The range is -18 dB - +18 dB (0.5 dB units), and the approximate value is shown by the perimeter LEDs. 7 [EQ ON] switch This switch turns the entire equalizer on/off. The switch LED will light when the EQ is on. 8 EQ [HPF] switch and LED (SUB LOW band only) This switch changes the SUB LOW band EQ type to HPF. The switch LED will light when HPF is selected. In this case, the [Q]/[GAIN] encoders of the SUB LOW band will have no function. 62