Yamaha CS1D Owner's Manual - Page 348

EFFECT GEQ GEQ (graphic EQ) functions GEQ (graphic EQ) functions Using the internal 31 band graphic EQ on the output channels GEQ PARAMETER [Function] In this screen you can make settings for the twenty-four 31-band graphic EQ modules that are provided for insertion into input/output channels. Here you can assign signal routes, specify the boost/cut amount for each band, and make notch filter settings, etc. ■ Console In the LCD FUNCTION ACCESS block, press the [GEQ] switch (press repeatedly until the screen shown at the right appears) ■ Display MENU button → GEQ button → GEQ PARAMETER tab SCENE MIDI/GPI/TC UTILITY SYS/W.CLOCK METER [Screen functions] 1 2 3 4 1 MODULE Select the desired module of the twenty-four graphic EQ modules (GEQ 1-GEQ 24). When you click this button, the GEQ SELECT popup window will appear. 2 INSERT Select the signal route into which this module will be inserted. When you click this button, the GEQ PATCH SELECT popup window will appear. The following signal routes can be selected. • INPUT 1-96 INS Insert In/Out of input channels 1-96 • MIX 1 INS-MIX 48 INS Insert In/Out of MIX channels 1-48 • MTRX 1 INS - MTRX 24 INS Insert In/Out of MATRIX channels 1-24 • ST A [L/R] INS Insert In/Out of the STEREO A channel (L/R) • ST B [L/R] INS Insert In/Out of the STEREO B channel (L/R) If you insert into the STEREO A/B channel or into a pair of input channels or MIX channels, adjacent odd-numbered → even-numbered modules will be assigned automatically. 13 MON/CUE