Yamaha CS1D Owner's Manual - Page 118
Basic operation for output channels, About the output channels
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Chapter 5. Basic operation for output channels This chapter explains basic operation for MIX channels, MATRIX channels, and STEREO A/B channels. About the output channels Blocks used to control the output channels The PM1D system provides MIX channels 1-48, MATRIX channels 1-24, and the STEREO A/B channels as output channels for MIX buses 1-48, MATRIX buses 1-24, and the STEREO bus. The signals sent to these output channels is routed through the internal six-band EQ and compressor, and is sent from the output jack that is patched by the OUT PATCH function. The following blocks of the CS1D console are used to control output channels. • MIX OUTPUT block This block specifies the level and on/off setting of the signals that are sent from the input channels and ST IN channels to MIX buses 1-48, and sends them to the output units patched to MIX channels, to the STEREO bus, and to the MATRIX buses. • STEREO OUTPUT block This block mixes the signals that are sent from the input channels/output channels to the STEREO bus, and outputs them from the output units that are patched to the STEREO A/B channels. MIX OUTPUT block • MATRIX OUTPUT block This block specifies the level and on/off setting of the signals that are sent from MIX channels 1-48, the STEREO A channel, and the SUB IN channels to MATRIX buses 1-24, and outputs them from the output units that are patched to the channels. STEREO OUTPUT block • SELECTED OUTPUT CHANNEL block This block selects the desired MIX channel, MATRIX channel, or STEREO A/B channel L or R, and specifies its on/off setting, EQ/compressor settings, and output level. MATRIX OUTPUT block SELECTED OUTPUT CHANNEL block 59