Yamaha CS1D Owner's Manual - Page 419

Output functions You can register 256 names, which are shared by inputs and outputs. Hint This template will maintain its previous state as long as you do not initialize all memories. To return to the factory settings, select "INITIALIZE ALL MEMORIES" when you perform memory initialization. For details on memory initialization, refer to p.194. The contents registered in this template can be saved to a memory card as SETUP data. For details refer to p.40. 5 Template copy buttons By clicking these buttons, you can copy both the short name and long name between the fields displayed in black or light blue in the selected name list or template list. • [®] button .........copies from the name list to the template name list. • [√] button .........copies from the template name list to the name list. When copying between the DCA group and template name list, only the long name will be copied. 6 7 6 Text box When the name area of the name list (3) or template name list (4) is in an editable state, the name for editing will be displayed here. Use the text palette (7) to input characters into this box, and click the ENTER button located at the left to input the name into the edited field (light blue) of the name list (3) or template name list (4). When input is completed, the editable state will be cancelled, and the field will be displayed in black to indicate the normal selected condition. 7 Character palette This palette allows you to input characters, numerals, and symbols into a text box. (For details on entering characters and on the function of each button, refer to "CS1D Operating Manual (Basic Operation)" →p.20.) Hint You can also input text from a keyboard connected to the KEYBOARD connector of the CS1D front panel. [Procedure] Assigning a short name/long name to an output channel or DCA group 1. Use the four buttons of the LIST SELECT (1) section to select the type of item whose name you wish to change. 2. In the name list, click the short name or long name field for the channel whose name you wish to change. (Alternatively, use the [CURSOR] switches to move the cursor to the field, and press the [ENTER] switch.) The selected field will be displayed in light blue to indicate that it can be edited. 3. Use the character palette or connnected keyboard to input a name into the text box. (For the character input procedure, refer to "CS1D Operating Manual (Basic Operation)" →p.20.) If the short name was selected in the name list you will be able to input four characters. If the long name was selected you will be able to input eight characters. 4. After you have input the characters, click the ENTER button in the screen. (Alternatively, use the [CURSOR] switches to move the cursor to the ENTER button in the screen, and press the [ENTER] switch.) The name will be registered in the name list. Hint When the cursor is on a field that is in an editable state (displayed in light blue), pressing the [ENTER] switch will have the same result as step 4. [Procedure] Registering a template name 1. In the template name list, click the field in which you wish to register a name. (Alternatively, use the [CURSOR] switches to move the cursor to the desired field, and press the [ENTER] switch.) The selected field will be displayed in light blue. 2. Use the character palette or connnected keyboard to input a name into the text box. (For the character input procedure, refer to "CS1D Operating Manual (Basic Operation)" →p.20.) If the short name was selected in the name list you will be able to input four characters. If the long name was selected you will be able to input eight characters. 84