Yamaha CS1D Owner's Manual - Page 23
Checking the status of each device (Standard mode), Checking the engine (Standard mode)
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Turning on the power and verifying the connections If the opening screen is followed by the "VERSION CHECK" popup window, it is possible that the PM1D system version is incorrect. Please unify the software version of all connected devices. For the procedure, refer to the explanation within the included PM1D System Software disc. Hint Normally, the display will show the screen that was accessed last when the power was turned off. Checking the status of each device (Standard mode) DSPx1 After you turn on the power of the PM1D system, you can use the LEDs and indicators of the various components to check that connections between components have been made appropriately. Check the status of each device as described below. The checking method differs between Standard mode and Mirror mode. This section describes checking for Standard mode. For Mirror mode, refer to "Checking the status of each device (Mirror mode)" (→p.18). Checking the engine (Standard mode) The front panel of the DSP1D-EX {DSP1D} engine shows the following information. ENGINE ID A B CONTROL I/O 1 2 INPUT CONFIGURATION 48CH 96CH POWER ON/ OFF ENGINE ID A B CONTROL I/O 1 2 INPUT CONFIGURATION 48CH 96CH 1 2 3 1 ENGINE ID These indicators show whether the engine (DSP1DEX {DSP1D}) is connected to the ENGINE A or ENGINE B connectors (DIGITAL I/O, CONTROL I/ O) of the console. In Standard mode, the A LED will always be lit. 2 CONTROL I/O If the CONTROL I/O connectors of the engine and console are connected correctly, the LED for the currently-valid CONTROL I/O connector (either 1 or 2) will light. 3 INPUT CONFIGURATION This indicates the number of monaural input channels that can be used on this engine. If the engine is the DSP1D-EX, the "96CH" LED will light. {For the DSP1D, the "48CH" LED will light.} For details on the lit/dark status of each indicator, refer to the operating manual included with the DSP1D-EX {DSP1D}. 15