Yamaha CS1D Owner's Manual - Page 479
INPUT COMP LIBRARY Input compressor, KEY IN 1-KEY IN 4
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 479 highlights
Input functions C KNEE This sets the sharpness of the angle at which the output level will change. A setting of HARD produces the sharpest angle, and a setting of SOFT5 produces the softest angle. D E F D INPUT COMP LIBRARY (Input compressor library) This button accesses the COMP LIBRARY window, where you can store/recall compressor settings (→p.182). E LINK ON/OFF (key-in link) This specify whether the key-in signals will link compressor operation for adjacent odd-numbered → even-numbered channels (link=on), or whether the compressors will operate with independent key-in signals (link=off). • Key-in signal flow when link=on LINK = ON Key-in signal of odd- THR numbered channel Detect the ATTACK processing GR maximum Key-in signal of even- THR level numbered channel ATTACK processing GR • Key-in signal flow when link=off LINK = OFF Key-in signal of odd- THR Detect the numbered channel maximum level ATTACK processing GR Key-in signal of even- THR Detect the numbered channel maximum level ATTACK processing GR However you are free to subsequently turn linking off and modify the parameter values. F SELECT (Key-in select) Select the key-in signal from the following choices. • SELF PRE EQ Pre-EQ signal of the currently selected input channel • SELF POST EQ Pre-compressor signal of the currently selected input channel • LEFT CH The signal from the previously-numbered input channel (the same signal as the SELF POST EQ of the previous channel) If you select LEFT CH, the post- INPUT FILTER signal of the previously-numbered channel will be the key-in signal. However, please be aware that the INPUT FILTER will not function unless COMP is on. • KEY IN 1-KEY IN 4 Signal of the input channel selected in the respective CH SELECT menu If input channel 1 or the L channel of a ST IN channel is selected, the LEFT CH button will not be displayed. Nor will it be displayed for paired channels. • Be careful not to confuse "compressor link" with "stereo pairing of input channels." Turning on compressor link simply causes the compressors to be linked by the key-in signal; the compressor parameters themselves can be set independently for each channel. • When input channels are used as a stereo pair, compressor link will automatically be turned on, and the compressor parameter values will also be linked. 144