Yamaha CS1D Owner's Manual - Page 502

LIBRARY operation Basic library UNIT PATCH LIBRARY NAME LIBRARY LIBRARY LIBRARY LIBRARY LIBRARY EFFECT OUTPUT CH INPUT CH OUTPUT COMP INPUT COMP INPUT GATE OUTPUT EQ INPUT EQ Basic library operation 5. Click the STORE button. A window will appear, asking you to confirm. • Window to confirm Store operation Hint If CONFIRMATION is turned off in the UTILITY PREFERENCE screen, the confirmation message will not appear, and the Store or Recall operation will be executed immediately. In the case of a library used to store settings of individual channels, selecting a different channel after the above popup window appears will cause the newly selected channel to be the store source. 6. To execute the Store operation, click the OK button. When the Store operation is executed, the stored data will be added to the library. You will exit the library popup window and return to the previous screen. If you click the CANCEL button instead of the OK button, the Store operation will be cancelled, and you will return to the library popup window. If you then press the EXIT button, you will exit the library popup window and return to the previous screen. Recalling (loading) library settings into the PM1D system Settings that were saved in a library (or read-only preset data) can be recalled into the PM1D system as follows. 1. Access the popup window for the desired library. For details on how to access the popup window, refer to the explanation for each library. Depending on the type of library, you will first need to select the item (channel, effect, GEQ module, etc.) that you wish to recall. 2. From the library list, select the number that you wish to recall, and click that line. The line you clicked will be highlighted to indicate that this number has been selected for display/editing. Hint Some library lists may contain data marked "READ ONLY." This is preset data written at the factory. Preset data can be recalled in the same way as the data that you yourself have stored. 3. Click the RECALL button. A window will appear, asking you to confirm the Recall operation. • Recall confirmation window In the case of a library used to recall settings of individual channels, selecting a different channel after the above popup window appears will cause the newly selected channel to be the recall destination. 4. To execute the Recall, click the OK button. When the Recall operation is executed, the data you selected in step 2 will be loaded into the PM1D system. You will exit the library popup window and return to the previous screen. If you click the CANCEL button instead of the OK button, the Recall operation will be cancelled, and you will return to the library popup window. If you then click the EXIT button, you will exit the library popup window and return to the previous screen. Hint If CONFIRMATION is turned off in the UTILITY PREFERENCE screen, the confirmation message will not appear, and the Store or Recall operation will be executed immediately. LIBRARY LIBRARY LIBRARY LIBRARY GEQ LIBRARY 167