Yamaha CS1D Owner's Manual - Page 20
Connecting an analog input/output unit to the engines (Mirror mode), ENGINE A, DSP1D-EX{DSP1D}
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
CS1D Operating Manual (Start-up) Connecting an analog input/output unit to the engines (Mirror mode) The following diagram shows a common way of making connections between the engine and analog input/output units for Mirror mode. WORD CLOCK IN INPUT 2 INPUT 1 1 ENGINE A (DSP1D-EX{DSP1D}) OUTPUT 2 OUTPUT 1 2 OUTPUT A WORD CLOCK IN AI8 (ID=2) ANALOG INPUT BOX OUTPUT B CONTROL PORT Switch = A OUTPUT A INPUT A AI8 (ID=1) OUTPUT B CONTROL PORT Switch = A ANALOG INPUT BOX WORD CLOCK IN AO8 (ID=1) ANALOG OUTPUT BOX INPUT B INPUT SELECTOR Switch = A INPUT A AO8 (ID=2) INPUT B INPUT SELECTOR Switch = A ANALOG OUTPUT BOX WORD CLOCK IN ENGINE B INPUT 1 (DSP1D-EX{DSP1D}) INPUT 2 WORD CLOCK IN OUTPUT 1 OUTPUT 2 Clock Generator 1 Analog input unit AI8 connection Connect the OUTPUT A connector of the AI8 analog input unit to one of the INPUT 1-INPUT 10 connectors of engine A, and connect the OUTPUT B connector of the AI8 to one of the INPUT 1-INPUT 10 connectors of engine B. 2 Analog output unit AO8 connection Connect the INPUT A connector of the AO8 analog output unit to one of the OUTPUT 1-OUTPUT 6 connectors of engine A. Connect the INPUT B connector of the AO8 to one of the OUTPUT 1-OUTPUT 6 connectors of engine B. • When using Mirror mode, OUTPUT connectors A and B of the AI8 must be connected to the identically-numbered INPUT connector of engines A and B. Be aware that if these are connected to differentlynumbered INPUT connectors, the content of the input signals will change when you switch between engines A and B. • When using Mirror mode, leave the CONTROL PORT switch of the AI8 in the A position as the default setting. 12 • When using Mirror mode, INPUT connectors A and B of the AO8 must be connected to the identicallynumbered OUTPUT connector of engines A and B. Be aware that if these are connected to differentlynumbered OUTPUT connectors, the content of the output signals will change when you switch between engines A and B. • When using Mirror mode, leave the INPUT SELECTOR switch of the AO8 in the A position as the default setting. • Be careful not to reverse the input and output. If you do so, the unit will not be recognized, and cannot be controlled.