Yamaha CS1D Owner's Manual - Page 193

Chapter 13. Graphic EQ The PM1D system provides twenty-four 31-band graphic EQ modules. This chapter explains how to operate the graphic EQ. Inserting a graphic EQ into a channel The 24 GEQ (graphic EQ) modules built into the PM1D system can be patched to the insert-out/insert-in of a desired channel. Here we will explain how to insert a graphic EQ into an input channel. [Procedure] 1. In the LCD FUNCTION ACCESS block, press the [GEQ] switch several times to access the following GEQ PARAMETER screen. A GEQ SELECT popup window will appear, allowing you to select a GEQ module (1-24). • GEQ SELECT popup window LCD FUNCTION ACCESS block [GEQ] switch • GEQ PARAMETER screen (GEQ function) 3. Select the desired module from GEQ 1 - GEQ 24, and click the corresponding button. When you click a button, you will return to the GEQ PARAMETER screen. Notice that the selected module is displayed at the right of the MODULE button. 4. Click the INSERT button located at the right of the MODULE button. The GEQ PATCH SELECT popup window will appear, allowing you to select the patch destination for the GEQ module. • GEQ PATCH SELECT popup window In the GEQ PARAMETER screen you can select a specific GEQ module, select the patch destination channel, and set the parameters. 2. Click the MODULE button in the upper left of the screen. 134 In this window, you will first use the top row of buttons to select the type of channel, and then use the remaining buttons to select the channel number.