Yamaha CS1D Owner's Manual - Page 33

Hint When the ADVANCED button is on, you can make more detailed word clock settings. 3. Click one of the following buttons to select the word clock source as the word clock master. In Standard mode you can select one of the following three choices as the word clock. When you change the word clock settings, noise may be heard from the output jacks of the CS1D and AO8, particularly if an MY8-AT digital I/O card is installed in the DIO8. To protect your speaker system, you must turn down the power amp output before changing the word clock settings. Such a change in the word clock settings can occur not only when PM1D system internal settings are changed, but also when the word clock setting is switched on an external device (e.g., a CD player or a recording device). ■ ENGINE A • INT 48 k (Default setting) The internal clock of the engine, 48 kHz • INT 44.1 k...........The internal clock of the engine, 44.1 kHz • W.CLOCK IN .....Supply a word clock to the WORD CLOCK IN connector of the engine Normally you will select either INT 48 k or INT 44.1 k. If you are using an external clock generator as the master, select W.CLOCK IN, and supply a word clock to the WORD CLOCK IN jack of the engine/ console. If when you change the word clock settings, the AI8 or AO8 indicator shows "UL" or the display shows a message warning that the word clock is not synchronized, check the connections between the engine and console, and the connections between the engine and the input/output units. Basic settings (Standard mode) 25