Yamaha CS1D Owner's Manual - Page 488

IN HA/INSERT IN PATCH 45 4 MUTE ON/OFF These buttons allow operations in the display screen to turn muting on/off for each mute group. If the MODE button 1 is set to MUTE MASTER, these buttons will be linked with the SCENE MEMORY [1]-[12] switches of the console. Hint If muting is turned on, the input channels that belong to that mute group will be in the same state as if the [ON] switch of the console had been turned off. They will not sent signals to the buses or output channels. At this time, the LED of the [ON] switch of the console will blink. 5 CLEAR These buttons clear all input channels that were assigned to the corresponding mute group. IN DCA/MUTE functions assigned to a mute group 9-12 to which an output channel has already been assigned. • When a scene is recalled, the mute group data of Recall Safe channels may be adjusted so that the recall safe settings are consistent within mute groups 9-12. Also when a channel library is recalled, the data that is recalled to the channel may be adjusted so that mute groups 9-12 are consistent. IN EQ IN GATE/COMP IN DELAY IN CH VIEW PAN/ROUTING IN DCA/MUTE 6 6 MUTE SAFE ON/OFF This button temporarily defeats muting for a channel. If this button is displayed as "-", clicking it will change the display to "ON" and will exclude that input channel from the mute group. Click it once again to return to the original state. • Normally, Mute Safe operations can be performed independently of scene memories. However when a scene is recalled and a channel changes from monaural to paired, this will be turned On for both paired channels if either of them had been set to Mute Safe On. • Mute groups 9-12 can be used for either input channels or output channels. However it is not possible to mix input and output channels in the same mute group. For this reason, input channels cannot be 153