Yamaha CS1D Owner's Manual - Page 292
When inserting to an input channel, you wish to insert the graphic EQ.
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
DCA GROUP block 2. Click desired MODULE button located in the upper left of the screen. The MODULE button lets you select the graphic EQ module that you wish to control. When you click this button, the following popup window will appear. Popup window for selecting a graphic EQ module 3. Click one of the GEQ 1 - GEQ 24 buttons to select a graphic EQ, you will return to the GEQ PARAMETER screen automatically. Confirm that the selected graphic EQ module is displayed at the right of the MODULE button. Confirm the selected graphic EQ module 5. Click a button to select the output channel in which you wish to insert the graphic EQ. • When inserting to an input channel Click to select the input channel number in the following order: IN 1-48 INSERT OUT button → 1-48 buttons or IN 49-96 INSERT OUT button → 49-96 buttons. • To insert into a MIX channel Click the MIX INSERT OUT button, and then click a 1-48 button to select the number of the MIX channel. • To insert into a MATRIX channel Click the MATRIX INSERT OUT button, and then click a 1-24 button to select the number of the MATRIX channel. • To insert into a STEREO A/B channel Click the button for the desired channel; either AL (L channel of STEREO A), Ar (R channel of STEREO A), bL (L channel of STEREO B), or br (R channel of STEREO B). You will return to the GEQ PARAMETER screen automatically. Confirm that the selected channel is displayed at the right of the INSERT button. Confirm the selected channel Hint If a GEQ is inserted in a channel, you can hold down the [SHIFT/GRAB] switch and press the [SEL] switch of that channel to display the GEQ. 4. Click the INSERT button located in the upper left of the screen. The INSERT button selects the output channel into which the graphic EQ will be inserted. When you click this button, the following popup window will appear. Popup window for selecting the output channel in which the graphic EQ will be inserted 6. Select the frequency band that will be assigned to the DCA faders. (1) Using the switch to select Hold down the [SHIFT/GRAB] switch (located in the data entry block) and press a [FADER STATUS] switch, and you will be able to operate the graphic EQ. + 1-12 1.60k-20.0k + 13-24 200-2.50k + 25-36 20-250 75