Yamaha CS1D Owner's Manual - Page 437

Output functions • When a scene is recalled, the DCA group data of Recall Safe channels may be adjusted so that Recall Safe settings are consistent within DCA groups 9-12. Also when a channel library is recalled, the data that is recalled to the channel may be adjusted so that settings are consistent for DCA groups 9-12. 4 56 7 4 CLEAR This button clears all output channels that were assigned to DCA faders. 5 CUE For each DCA fader, these buttons switch cue on/off. (These buttons are linked with the [CUE] switches in the DCA/GROUP block on the console.) When these buttons are on, Cue will be turned on for all channels assigned to the corresponding DCA fader. 6 MUTE These buttons switch muting on/off for each DCA fader. Hint If the MUTE button is on, the corresponding output channels will be in the same state as if the DCA fader were operated to lower the output level to - ∞ dB, and no signal will be output. 7 DCA LEVEL SET These buttons operate all DCA faders at once. • ALL NOMINAL When you click this button, any DCA 9-12 faders to which output channels are assigned (and faders to which no channel is assigned) will move to the nominal level (0 dB) position. • ALL MINIMUM When you click this button, any DCA 9-12 faders to which output channels are assigned (and faders to which no channel is assigned) will move to the - ∞ dB position. 8 8 DCA faders 9-12 These indicate the DCA fader levels, following the DCA faders on the console. You can also drag the onscreen faders to change the levels. (When you do so, the DCA faders on the console will follow.) 102