Yamaha CS1D Owner's Manual - Page 284
put channel MIX, MATRIX, or STEREO A/B
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 284 highlights
4 CHANNEL SELECT [SHIFT] switch If you hold down this switch and press either of the CHANNEL SELECT [▼/DEC]/[▲/INC] switches, the number will change in steps of 12 from the current value. 5 [CHANNEL COPY] switch Use this switch to copy parameters of an output channel to a different output channel. [Procedure] Copying output channel parameters to a different channel 1. Select the copy source output channel. 2. In the SELECTED OUTPUT CHANNEL block, press the [CHANNEL COPY] switch. The [CHANNEL COPY] switch LED will light. However if you do not specify the copy destination within ten seconds, the copy operation will be cancelled. 3. Press the [SEL] switch of the copy destination output channel (MIX, MATRIX, or STEREO A/B). A popup window will appear, asking you to confirm the copy operation. 4. To execute the copy operation, click the OK button. To cancel the copy operation, click the CANCEL button. Hint For details on the types of parameter that are copied when you copy between output channels, refer to the appendices (→p.44). If you wish to perform additional copies, repeat steps 1-4. Copying is possible only between the same type of output channels (between MIX channels, between MATRIX channels, or between STEREO A/B). Furthermore, even for the same type of output channels, it is not possible to copy between a monaural output channel and two paired channels. If you attempt to copy an inappropriate combination of channels, a message of "DATA TYPE CONFLICT! CANCELED" will appear, and copying will not occur. It is not possible to use the [▼/DEC]/[▲/INC] switches to select the copy destination channel. The channel copy operation will be cancelled. SELECTED OUTPUT CHANNEL block 67