Yamaha CS1D Owner's Manual - Page 288

DCA GROUP block DCA fader section In this section you can control the levels of the DCA groups, input channels, or MIX channels assigned to DCA groups 1-12. You can also use this section to adjust the boost/cut amount for each band of the internal graphic EQ. 1 2 3 5 6 4 7 1 1 DCA [NAME] indicator The upper row of indicators will show the type and number of the channel that is selected in the FADER STATUS section. (If DCA is selected, this will show display the DCA name of up to 8 characters.) The display has the following meaning. • INxx Twelve input channels will be directly assigned to DCA faders 1-12. The xx digits will indicate the channel number. • STxx ST IN 1-8 are directly assigned to DCA faders 1-8. The xx location will indicate a channel number. 2 In this case, DCA faders 9-12 will have no effect. • MXxx Twelve MIX channels will be directly assigned to DCA faders 1-12. The xx digits will indicate the channel number. • Other DCA groups are assigned to DCA faders 1-12, and the long name of the DCA group will be displayed. The lower row of indicators displays the short name of the channel assigned to the fader or the long name of the DCA group. These names can be input from the display (in the NAME screen of the IN PATCH function or OUTPUT PATCH function). 71