Yamaha CS1D Owner's Manual - Page 366
MIDI/GPI/TC, Access the MIDI/GPI/TC function MIDI PRO
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 366 highlights
MIDI/GPI/TC function 9 EFFECT GEQ SCENE MIDI/GPI/TC UTILITY SYS/W.CLOCK 9 List This list shows the event (scene recall/effect recall) that is assigned to each program change number. • CH This is the MIDI channel on which the program change will be transmitted/received. In Single mode when the BANK button is on, the number in this column will indicate the bank number. • PGM No. This shows the program number 1-128. Be aware that some external devices may display the program number as 0-127. When transmitting program changes from such an external device to the PM1D system, add 1 to the program number. • PROGRAM CHANGE EVENT This shows the event that will be executed when the program number of the corresponding MIDI channel is received. When you click the button in the list, a popup window will appear in which you can select the event to be assigned to that program number. When the event displayed in this column is executed on the CS1D, the program change of the corresponding MIDI channel will be transmitted. [Procedure] Executing a specific event when a given program change is received Here's how to make settings so that when a given program change message is received from an external device, the specific event (scene recall/effect recall) assigned to that program change message will be executed. 1. Connect the MIDI OUT connector of the external device to the [MIDI IN] connector of the CS1D or to the [MIDI IN] connector of the DSP1D-EX {DSP1D}. 2. Access the MIDI/GPI/TC function MIDI PROGRAM screen, and use the MIDI PORT buttons to select the port at which you wish to receive the program changes. 3. Turn on one of the MIDI MODE buttons to select either Multi mode or Single mode as the program change reception/transmission mode. 4. If you selected Single mode in step 2, use the TX CH/RX CH knobs to specify the MIDI channels that will be used to transmit and receive program change messages. As necessary, turn on the OMNI button or BANK button. 5. From the PROGRAM CHANGE EVENT list, select the program number to which you wish to assign an event, and click the button in that column. A popup window will appear, in which you can select the event to assign. 31 METER MON/CUE