Yamaha CS1D Owner's Manual - Page 584
Sound recorded via ST OUT DIGITAL or a MY, Is the LIMIT set to -24 dB? CS1D Operation Man
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 584 highlights
Appendices ■ High frequency range is muted • Is emphasis being applied? If the emphasis data does not match the input signal, the high frequency range will be muted. ("CS1D Reference Manual (Software)" →p.133) • Is EQ applied? ("CS1D Operation Manual (Basic Operation)" →p.57, 83) ■ The [ON] switches and [SEL] switches select the wrong channel • Make sure that the correct mixing layer is selected. ("CS1D Reference Manual (Hardware)" →p.5, 13, 41, 47) ■ An input signal is being received, but there is no monitor output • Is "CUE INTERRUPTION" turned on? If CUE is ON, the CUE signal will be output from MONITOR OUT. ("CS1D Reference Manual (Software)" →p.71) ■ A channel continues to be heard even in SOLO mode • Is that channel set to SOLO SAFE? ("CS1D Reference Manual (Software)" →p.74) ■ Insufficient headroom, especially when EQ is boosted • Use the EQ attenuator to lower the level. ("CS1D Reference Manual (Hardware)" →p.29) ■ Sound recorded via ST OUT DIGITAL or a MY card with digital output appears fragmented • Make sure that the dither setting matches the word length of the recording device. ("CS1D Reference Manual (Software)" →p.56) ■ Signal phase is incorrect for a stereo pair • You must set both input channels of a stereo pair to the same phase setting. Phase settings are not linked when you specify stereo pairing. ("CS1D Reference Manual (Hardware)" →p.21) ■ Signal appears to be delayed • Make sure that the channel delay function is set cor- rectly. ("CS1D Reference Manual (Hardware)" →p.22) ■ Some channels are not updated when a scene memory is recalled • Are those channels set to Recall Safe? ("CS1D Operation Manual (Basic Operation)" →p.106) ■ I selected CUE in the EFFECT screen, but it is defeated without my action • This will be defeated automatically when you switch to a different display screen. ("CS1D Reference Manual (Software)" →p.10) ■ Cannot make boost settings in the GEQ • Is the LIMIT set to -24 dB? ("CS1D Operation Man- ual (Basic Operation)" →p.136) ■ When a scene is recalled, some time is required before faders stop moving • Has the fade time been set? ("CS1D Reference Manual (Software)" →p.25) ■ Unconnected units or uninstalled cards are displayed • Have virtual unit or virtual card settings been made? ("CS1D Reference Manual (Software)" →p.47, 50) ■ CS1D panel LEDs are dim • Adjust the LED BRIGHTNESS setting in the PREF- ERENCE screen of the UTILITY function. ("CS1D Reference Manual (Software)" →p.36) ■ The VERSION CHECK popup window appeared • The software/firmware of the component that failed the test does not match the version of the PM1D system. The software/firmware of that component must be updated. For details on how to perform the update, refer to the documentation on the included PM1D system software disc. 52