Yamaha CS1D Owner's Manual - Page 241
MIX SEND [ON] switch and LED
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
CS1D Reference Manual (Hardware) Of the LEDs around the [PAN] encoder, the LED at the q mark indicates that the signal is panned to the center. • When the send destination MIX bus is not paired MIX1 SEND LEVEL MIX2 SEND LEVEL PAIR MIX1 MIX2 STEREO L STEREO R INPUT CHANNEL ...... FADER ON PAN ...... MIX1 (VARI) LEVEL ON ON MIX2 (VARI) LEVEL • When the send destination MIX bus is paired MIX1/2 SEND PAN MIX1/2 SEND LEVEL PAIR MIX1 MIX2 STEREO L STEREO R INPUT CHANNEL ...... FADER ON PAN ...... 3 MIX SEND [NAME] indicator This shows the short name of the MIX bus. The short name can be input in the display (OUT PATCH function NAME screen, etc.). 4 MIX SEND [ON] switch and LED This is an on/off switch for the signal that is sent from the selected channel to the corresponding MIX bus. (The switch LED will light when on.) If the send destination MIX bus is paired, the setting of this parameter will be linked for adjacent oddnumbered to even-numbered MIX buses. 5 MIX SEND [PRE] switch and LED This switch specifies the location of the signal that is sent from the selected channel to a VARI type MIX bus. If the send destination MIX bus is paired, the setting of this parameter will be linked for adjacent oddnumbered to even-numbered MIX buses. • If the [PRE] switch LED is dark The post-fader signal will be sent to the corresponding MIX bus. • If the [PRE] switch LED is lit The pre-EQ or pre-fader signal will be sent to the corresponding MIX bus. The pre-EQ/pre-fader selection can be made in the display (PAN/ROUTING function CH to MIX screen). 6 MIX SEND [FIX] LED This LED indicates the type of MIX bus (FIX or VARI). This LED will light when the corresponding MIX bus is set to FIX. The FIX/VARI selection can be made in the display (PAN/ROUTING function CH to MIX screen). 7 MIX SEND LAYER [1-24]/[25-48] switches and LEDs These switches select either MIX buses 1-24 or MIX buses 25-48 as the MIX buses to be controlled and displayed in the MIX SEND section. The LED of the currently selected switch will light. MIX1/2 (VARI) LEVEL PAN ON 24