Yamaha CS1D Owner's Manual - Page 156

Chapter 7. DCA groups/Mute groups Assigning output channels to a mute group Here's how to assign an output channel (MIX channel, MATRIX channel) to a mute group. [Procedure] 1. In the LCD FUNCTION ACCESS block, press the OUTPUT [DCA/MUTE] switch several times to access the following MUTE GROUP ASSIGN screen (OUT DCA/MUTE function). 3. In the same way, assign output channels to other mute groups. It is not possible to assign input channels and output channels to the same mute group of mute groups 9-12. If an input channel is already assigned, attempting to assign an output channel will cause an error message to appear, and the assignment will not be completed. (The converse also applies.) LCD FUNCTION ACCESS block OUTPUT [DCA/MUTE] switch • MUTE GROUP ASSIGN screen (OUT DCA/ MUTE function) In this screen, mute groups 9-12 are shown from top to bottom, and output channels (MIX channels, MATRIX channels) are shown from left to right. Use the left/right scroll bar to view channels that are currently not visible. 2. To assign an output channel to a mute group, click the grid where the two intersect. A "●" symbol will appear in the grid, and the output channel will be assigned to the mute group. (If you click once again, the assignment will be cancelled, and the "●" symbol will disappear.) 97