Yamaha CS1D Owner's Manual - Page 271

CS1D Reference Manual (Hardware) 3 STEREO B [MONO] switch and LED (STEREO B channel only) This switch selects monaural or stereo output for the STEREO B channel. When the LED is lit, the output of the STEREO B channel will be monaural, and the same signal will be output to the channels of the output units that are patched to STB (L) and STB (R). In this case, the signals of the left and right channels will be mixed with a 3 dB attenuation. Hint The signal that is sent from STEREO B to the MATRIX bus can be switched on/off in the LCD screen. 4 STEREO [SEL] switch and LED This switch selects the STEREO A/B channel to which your operations will apply. When you press this switch, the STEREO A or STEREO B channel can be controlled in the SELECTED OUTPUT CHANNEL block. This will also be reflected by the settings in the display. Hint Each time you repeatedly press the STEREO [SEL] switch, you will alternate between the L channel and R channel of STEREO A or STEREO B. For example if you repeatedly press the STEREO A channel [SEL] switch, the CHANNEL SELECT [NUMBER] indicator of the SELECTED OUTPUT CHANNEL block will alternately display "AL" and "Ar." However since all parameters except for DELAY parameters are linked for the STEREO A/B channels, you will probably not often need to switch between L and R channels. • Using the STEREO A channel [SEL] switch to alternate between L and R channels ST s t AL CHANNEL COPY MATRIX MIX SHIFT DEC INC CHANNEL SELECT SELECTED OUTPUT CHANNEL ON ON TO MTRX MONO SEL SEL INS 10 5 0 5 10 INS 10 5 0 5 10 ST s t AR CHANNEL COPY MATRIX MIX SHIFT DEC INC CHANNEL SELECT SELECTED OUTPUT CHANNEL ON ON TO MTRX MONO SEL SEL INS 10 5 0 5 10 INS 10 5 0 5 10 54