Yamaha CS1D Owner's Manual - Page 485

Input functions IN DCA/MUTE functions Set DCA, and mute group DCA ASSIGN [Functions] Assign input channels to DCA groups 1-12 so that they can be controlled by DCA faders 1-12. ■ Console In the LCD FUNCTION ACCESS block, press the INPUT [DCA/ MUTE] switch (Press repeatedly until the screen shown at the right appears.) ■ Display MENU button → INPUT DCA/ MUTE button → DCA ASSIGN tab [Screen functions] 1 2 3 1 These are the DCA group numbers. The number corresponding to the grid where the cursor is currently located will be highlighted. 2 These are the eight-character names displayed in the DCA fader section. You can also click here and modify the names of the DCA faders. 3 Grid This is the grid where input channels (horizontal rows) can be assigned to DCA groups (vertical columns). Move the cursor to the desired grid location, and press the [ENTER] switch (or click) to set/cancel the assignment. To access channels that are not currently displayed, use the horizontal scroll bar. Hint It is possible to assign a single input channel to two or more DCA groups for multiple DCA control. For details refer to the section on basic operation. • DCA groups 9-12 can be used for either input channels or output channels. However, it is not possible to use the same DCA fader for both inputs and outputs. For this reason, input channels cannot be assigned to a DCA group 9-12 to which an output channel has already been assigned. 150