Yamaha CS1D Owner's Manual - Page 486

IN HA/INSERT IN PATCH IN EQ • When a scene is recalled, the DCA data of Recall Safe channels may be adjusted so that the recall safe settings are consistent within DCA groups 9-12. Also when a channel library is recalled, the data that is recalled to the channel may be adjusted so that DCA groups 9-12 are consistent. 4 56 7 4 CLEAR These buttons clear all input channels that have been assigned to the corresponding DCA group. 5 CUE These buttons switch cue on/off for each DCA group. (They are linked with the [CUE] switches of the DCA/GROUP block of the console.) When these buttons are on, cue will be on for all channels assigned to the corresponding DCA group. IN DCA/MUTE functions 6 MUTE These buttons switch muting on/off for each DCA group. Hint When a MUTE button is on, the corresponding channels will be set to the same state as when the DCA fader is operated to lower the input level to - ∞ dB, and no signal will be sent to the buses or output channels. 7 DCA LEVEL SET These buttons set all DCA faders simultaneously. • ALL NOMINAL When you click this button, any DCA 1-12 faders to which an input channel is assigned (and faders to which no channel is assigned) will move to nominal level (0 db) position. • ALL MINIMUM When you click this button, any DCA 1-12 faders to which an input channel is assigned (and faders to which no channel is assigned) will move to the - ∞ position. 8 8 DCA faders 1-12 These indicate the DCA fader levels in accordance with the DCA groups of the console. You can also drag the on-screen faders to change the levels. (When you do so, the DCA faders of the console will move accordingly.) IN GATE/COMP IN DELAY IN CH VIEW PAN/ROUTING IN DCA/MUTE 151