Yamaha CS1D Owner's Manual - Page 529

Other Memory initialization [Function] Restore scene memories and other internal data such as libraries to their factory-set condition. When you initialize the memory, all previously-saved data will be erased, and cannot be recovered. Please use caution. If memory contains important data, you must save it to a memory card inserted in the PC ATA STORAGE CARD slot of the CS1D before you initialize the memory. [Procedure] 1. Turn off the power of the PW1D power supply. 2. Turn on the power of the PW1D, and after the opening screen appears in the LCD display of the CS1D, repeatedly press the left/right switches located below the track pad of the data entry block until the following screen appears in the display. 3. Use the track pad and the left/right switches to select either "INITIALIZE ALL MEMORY" or "INITIALIZE CURRENT SCENE." When you select one of these, the corresponding display shown below will appear. "INITIALIZE CURRENT SCENE": The current state will be initialized. SCENE MEMORY settings or the various LIBRARY settings that have been stored will not be initialized. The following data will be initialized. • CURRENT SCENE • CURRENT UNIT • CURRENT PATCH • CURRENT NAME • CURRENT SETUP 4. Use the left/right switches on the track pad to select OK. After initialization occurs, the system will restart. If you wish to abort the initialization, select CANCEL. "INITIALIZE ALL MEMORY": All memory will be initialized. All parameters that can be stored in memory will return to their factory-set condition. 194