Yamaha CS1D Owner's Manual - Page 415

Output functions INSERT POINT [Function] For each output channel, switch insertion on/off, and select the insert I/O point. ■ Console In the LCD FUNCTION ACCESS block, press the OUTPUT [PATCH] switch (press repeatedly until the screen shown at the right appears) ■ Display MENU button → OUTPUT PATCH button → INSERT POINT tab [Screen functions] 23 1 Before turning this button on, you must assign input/output jacks to the insert out/in points in the OUT PATCH function INSERT PATCH screen. Be aware that if the INS. button for an output channel is turned on when either the input or output jack is unpatched, the correct signal will no longer be output from that output channel. 4 1 CH (output channel) This shows the number of the output channel that you are setting. For two channels that are a pair, this area will display a heart symbol, and items 3-4 will be common. 2 NAME The short name assigned to each output channel is displayed here. You can also click this area to assign a short name/long name (→p.83). 3 INS. (insert on/off) This button switches insertion on/off for each channel. 80 4 INSERT I/O POINT For each output channel, select the insert I/O point (the location in the signal patch where the external device will be inserted) from the following choices. • PRE EQ Immediately before the EQ • PRE COMP .........Immediately before the compressor • PRE DELAY ....... Immediately before the delay • PRE FADER ....... Immediately before the fader • POST ON........... Immediately after the [ON] switch