Yamaha CS1D Owner's Manual - Page 120
Basic operation of the MIX OUTPUT block, Controls and functions of the MIX OUTPUT block
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Chapter 5. Basic operation for output channels Basic operation of the MIX OUTPUT block This section explains basic operation of the MIX OUTPUT block. Controls and functions of the MIX OUTPUT block MIX [NAME] indicator This shows the short name of the MIX channel. MIX [TO ST] switch and LED This is an on/off switch for the signal that is sent from the MIX channel to the STEREO bus. MIX [ON] switch and LED This is an on/off switch for the MIX channel. If this switch is off, no signal will be sent to the channel of the output unit that is ON patched to the corresponding MIX channel. MIX [PAIR] LED This LED will light if the two adjacent oddnumbered → even-numbered MIX channels have been paired. MIX [LEVEL/BAL] encoder and LEDs These encoders set the output level of MIX channels 1-48. [INS] LED This LED will light if insertion is on for the MIX channel. ON PAIR MIX [TO MTRX] switch and LED This is an on/off switch for the signal that is sent from the MIX channel to the MATRIX buses. If this switch is off, no signal will be sent from that MIX channel to any MATRIX bus. MIX [DCA] switch and LEDs This switch assigns each MIX channel to DCA faders 9-12. When a MIX channel is assigned to a DCA fader, the corresponding LED will light. SAFE [RCL] LED This LED will light for MIX channels that are set to Recall Safe (a condition in which the channel is independent of scene recall operations). SAFE [MUTE] LED This LED will light for MIX channels that are set to Mute Safe (a condition in which the channel is independent of mute group operations). MIX [CUE] switch and LED This switch monitors the currently selected MIX channel. MIX [SEL] switch and LED This switch selects the MIX channel that your operations will affect. The MIX [SEL] LED of the currently selected MIX channel will light. 61