Yamaha CS1D Owner's Manual - Page 579

MIDI Data Format MIDI Data Format 1. TRANSMIT/RECEIVE DATA 1.1 CHANNEL MESSAGE 1.1.1 CONTROL CHANGE (Bn) In SINGLE CH mode when BANK is ON, these messages will be received on the matching [Rx CH] from the MIDI IN for which BANK SELECT reception is specified. These messages will determine the bank of the next-received program change. In SINGLE CH mode when BANK is ON, a Bank Select message will be transmitted from the selected MIDI OUT according to the [Tx CH] setting when a scene memory or effect library is recalled. STATUS 1011nnnn Bn 00000000 00 0vvvvvvv vv 00100000 20 0vvvvvvv vv Control Change Bank Select MSB MSB Value Bank Select LSB LSB Value 1.1.2 PROGRAM CHANGE (Cn) These messages will be received on the matching [Rx CH] from the MIDI IN specified for reception. However if [OMNI] is ON, they will be received regardless of the channel. If [Program Change ECHO] is ON, these messages will be echoed. According to the [Program change table] settings, these messages will recall scene memories or effect libraries. When a scene or effect library is recalled, these messages will be transmitted on the [Tx CH] according to the settings of the [Program change table] if [Program Change TX] is ON. If the recalled memory number has been assigned to two or more program numbers, the program number of the lowest-numbered channel and lowest-numbered bank will be transmitted. STATUS DATA 1100nnnn Cn 0nnnnnnn nn Program Change Program No. ( 0-127) 1.2 ACTIVE SENSING (Fe) Once this message has been received, an interval of 300ms or more during which no message is received will cause MIDI communications to be initialized, clearing Running Status etc. STATUS 11111110 FE Active Sensing 2. TRANSMISSION CONDITION CONTROL CHANGE BANK SELECT $BnH PROGRAM CHANGE $CnH BANK ON PGM Tx ON MIDI TX CH? MIDI IN ECHO ON MIDI OUT 3. RECEIVE CONDITION MIDI IN MIDI Rx CH? PGM OMNI ON BANK ON PGM Rx ON $BnH CONTROL CHANGE BANK SELECT $CnH PROGRAM CHANGE ECHO ON MIDI OUT 47