Yamaha CS1D Owner's Manual - Page 37

3. Make sure that the master word clock and the word clock input select are set as follows. MASTER CLOCK SELECT • The W.CLOCK of the engine or console is on WORD CLOCK INPUT SELECT Console Engine A/B Each unit W.CLOCK IN W.CLOCK IN W.CLOCK IN Word clock settings will automatically be as shown above. Although it is possible to change this setting manually, you should supply a word clock from an external clock generator to each device (→refer to the connection methods on p.10, 12), and use the system with the above settings to ensure that the system operates in a stable manner. With these settings, the word clock from the external clock generator will be supplied directly to each device in the PM1D system even if you switch between engines A and B in case of problems, so that the clock itself will not be switched, and the change will occur in the shortest possible time. If when you change the word clock settings, the AI8 or AO8 indicator shows "UL" or the display shows a message warning that the word clock is not synchronized, check the connections between the engines and console, and the connections between the engines and the input/output units. Basic settings (Mirror mode) 29