Yamaha CS1D Owner's Manual - Page 12

CS1D Operating Manual (Start-up) Terms used in the "CS1D Operating Manual (Start-up)" Of the specialized terms used in operating the CS1D, this section will explain the terms that appear in "CS1D Operating Manual (Start-up)." For a more detailed explanation of terms, refer to "CS1D Operating Manual (Basic Operation)." [CURSOR] switches Display Track pad Data entry block [ENTER] switches Left switch Right switch • Display This refers to the LCD display located in the upper center of the CS1D console. When you wish to change an internal setting of the CS1D, you can recall the appropriate screen in the display, and use the buttons or knobs in the display to edit the setting. • Pointer The arrow shown in the display is called the "pointer," and is used to select the object that you wish to modify. You can move the pointer by pressing your finger on the track pad (located in the data entry block) and dragging it up/down/left/right. Pointer • Click "Click" refers to the action of placing the pointer on a specific item in the display, and pressing the left or right switch of the track pad (located in the data entry block). This action is used to turn an on-screen button on/off, or to move the cursor to a specific item. Using the [CURSOR] switches (located in the data entry block) to move the cursor to a specific item and then pressing the [ENTER] switch will have the same result as clicking on that item. Hint As alternative ways to perform this action, you can use a mouse connected to the MOUSE connector of the CS1D, or use the arrow keys and ENTER key of a keyboard connected to the KEYBOARD connector of the CS1D. • Cursor The red frame shown in the display is called the "cursor." An on-screen item will be enclosed by the cursor to indicate that this item is selected for modification. Cursor Left switch Click Right switch Mouse left click Mouse right click Click 4