Yamaha CS1D Owner's Manual - Page 252
Press the [CHANNEL COPY] switch., CHANNEL COPY] switch and LED
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
This function is convenient when you wish to quickly select an input channel that is at the same position of another INPUT block. 4 [CHANNEL COPY] switch and LED This switch is used to copy parameters from the desired input channel to another input channel. When you press this switch, the currently selected input channel will be the copy source, and the input channel whose [SEL] you press immediately thereafter will be the copy destination. [Procedure] Copying the input channel/ST IN channel parameters to another channel 1. Select the input channel or ST IN channel that will be the copy source. 2. Press the [CHANNEL COPY] switch. The [CHANNEL COPY] switch LED will light. However if you do not specify the copy destination within ten seconds, the copy operation will be cancelled. 3. Press a [SEL] switch to select the copy destination input channel or ST IN channel. A popup window will appear, asking you to confirm the copy operation. 4. To execute the copy operation, click the OK button. To cancel the copy operation, click the CANCEL button. Hint For details on the types of parameter that are copied when you copy between input channels, refer to the appendices (→p.44). If you wish to perform another copy, repeat steps 1- 4. Copying is possible only between monaural input channels or stereo input channels (a ST IN channel or two paired channels). If you attempt to copy some other combination of channels, a message of "DATA TYPE CONFLICT! CANCELED" will appear, and copying will not occur. It is not possible to use the [▼/DEC]/[▲/INC] switches to select the copy destination channel. The channel copy operation will be cancelled. SELECTED INPUT CHANNEL block 35