Yamaha CS1D Owner's Manual - Page 169
Monitor, Basic operation of the MONITOR A/MONITOR B About MONITOR A/MONITOR B
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Chapter 10. Monitor This chapter explains monitoring functions of the PM1D system such as the MONITOR A/B outputs and the cue/solo functions. Basic operation of the MONITOR A/MONITOR B section About MONITOR A/MONITOR B The PM1D system provides two monitor outputs, MONITOR A and MONITOR B. For each, the monitoring source can be selected and the output level set independently. To control MONITOR A/MONITOR B from the CS1D console, you will use the following sections of the MASTER block. • MONITOR A section This section controls the monitor signal that is output from MONITOR OUT jacks A located on the rear panel of the CS1D or from the MONITOR A headphone jacks located on the top panel and front panel of the CS1D. You can select the monitor source, set the output level, switch between stereo/ mono, and set the delay function. • MONITOR B section This section controls the monitor signal that is output from MONITOR OUT jacks B located on the rear panel of the CS1D or from the MONITOR B headphone jacks located on the top panel and front panel of the CS1D. You can select the monitor source and set the output level. Hint MONITOR A/MONITOR B operations can also be performed within the display (MON/CUE function MONITOR A screen, MONITOR B screen). By using these screens, you can make more detailed settings than can be made in the MONITOR A/MONITOR B sections. Please note that the available functions differ between MONITOR A and MONITOR B. The following table shows the monitor sources that can be selected for each monitor output, and the functions that are available. • Differences between the MONITOR A and MONITOR B functions Output jacks Selectable monitor sources MONITOR A MONITOR OUT jacks A Headphone jack A 2TR IN 1 2TR IN 2 ST A ST B DEFINE Delay function ● Gate function ● DIRECT IN ● COMM IN ● DIMMER ● Cue/solo signal output ● MONITOR B MONITOR OUT jacks B Headphone jack B 2TR IN 1 2TR IN 2 ST A ST B MONITOR A DEFINE ✕ (*) * The cue/solo signal can be output indirectly by selecting MONITOR A as the monitor source. 110