Yamaha CS1D Owner's Manual - Page 77

CS1D Operating Manual (Basic Operation) Moving the cursor Here's how to move the cursor (red box) in order to select the display parameter that you wish to edit. Moving the cursor [Procedure] 1. Press a CURSOR switch. The cursor in the display will move in the direction of the switch you pressed. However, the cursor will not move if no parameter exists in the direction of that switch. Moving the cursor from a scroll window [Procedure] 1. Hold down the [SHIFT/GRAB] switch, and press a CURSOR switch. The cursor will move out of the scroll window (where which it was located) in the direction of the switch you pressed. This technique can be used in screens that have a scroll window (e.g., the IN/OUT PATCH function INSERT PATCH screen) or in screens that have a list window (e.g., the SCENE function MEMORY screen). • Using the [SHIFT/GRAB] switch and the CURSOR [√]/[®] switches to move the cursor Move to the adjacent grid Hint If the cursor is on a grid such as in the PATCH screen, rotating the [DATA] encoder clockwise will move the cursor toward the right, and rotating it counterclockwise will move the cursor toward the left. If you hold down the [SHIFT/GRAB] switch, rotating the [DATA] encoder clockwise will move the cursor downward, and rotating it counterclockwise will move the cursor upward. [SHIFT/GRAB] switch + CURSOR [®] switch 18