Yamaha CS1D Owner's Manual - Page 443

Output functions MIX to MATRIX [Function] Select a MATRIX bus, and set the level, on/off, and sent point of the signal that is sent from the MIX channel/ STEREO A/B channel to that MATRIX bus. ■ Console In the LCD FUNCTION ACCESS block, press the OUTPUT [MATRIX/ST] switch (press repeatedly until the screen shown at the right appears) ■ Display MENU button → OUTPUT MATRIX/ST button → MIX to MATRIX tab [Screen functions] 1 2 3 4 5 6 1 SEL (select MATRIX bus) When you click this button, a popup window will appear in which you can select the send destination MATRIX bus. 108 2 MTRX bus number/name This displays the number, short name, and pairing status of the currently selected MATRIX bus. You can click the short name area to assign a name, or click the heart symbol to set/cancel pairing. 3 Fader This sets the send level of the signal that is sent from the MIX channel/STEREO A/B channel to the MATRIX bus selected in 1. 4 ON/OFF This is an on/off switch for the signal that is sent from the MIX channel/STEREO A/B channel to the MATRIX bus selected in 1. 5 PRE FADER/POST FADER/POST ON These buttons select the send point for the signal that is sent from the MIX channel/STEREO A/B channel to the MIX bus selected in 1. • When the PRE FADER button is on The signal will be sent from immediately before the fader. • When the POST FADER button is on The signal will be sent from immediately after the fader.