Yamaha CS1D Owner's Manual - Page 165

Chapter 9. Recall safe/Mute safe This chapter explains the "Recall Safe" function that excludes specific channels or parameters from recall operations, and the "Mute Safe" screen that excludes specific channels from mute operations. Recall safe "Recall Safe" is a function that allows you to specify certain channels or parameters to remain unaffected when a scene is recalled. For example if you specify Recall Safe for a channel that you always want to control manually, the parameters of that channel will not change even when a new scene is recalled. There are two ways to set a channel to Recall Safe; you can use the top panel of the console, or you can use a function within the display. Using the console to set/defeat Recall Safe Here's how to use the top panel of the console to set/defeat Recall Safe. This method is convenient when you wish to temporarily operate only a specific channel manually. [Procedure] 1. Use the [SEL] switches to select the channel for which you wish to select Recall Safe. You can select input channels (input channels, ST IN channels) or output channels (MIX channels, MATRIX channels, STEREO A/B channels). 2. If you selected an input channel in step 1, press the SAFE [RECALL] switch located in the SAFE section of the SELECTED INPUT CHANNEL block. 3. If you selected an output channel in step 1, press the SAFE [RECALL] switch located in the SAFE section of the SELECTED OUTPUT CHANNEL block. SELECTED OUTPUT CHANNEL block SELECTED INPUT CHANNEL block DCA SAFE ANNEL SAFE [RECALL] switch DCA SAFE SAFE [RECALL] switch In either case, the SAFE [RECALL] switch LED will light, and the corresponding channel will be set to Recall Safe. As desired, make settings for other channels in the same way. 4. To defeat Recall Safe, use the [SEL] switches to access the corresponding channel, and press the SAFE [RECALL] switch once again. The SAFE [RECALL] switch LED will go dark, and Recall Safe will be defeated for that channel. 106