Yamaha CS1D Owner's Manual - Page 359
Set All, Clear All, Others, Dca 1-12, Geq 1-24, Effect 1-8, Mute Master, Recall Safe
View all Yamaha CS1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 359 highlights
Global functions Hint You may select two or more parameters for the same channel (except for ALL). ALL will automatically be selected for channels for which individual parameters are not selected. • Selecting all parameters other than ALL will not apply Recall Safe to all parameters of that channel. If you want to protect all parameters of the channel, you must select ALL. • Even if a certain unit is set to Recall Safe, HA AB LINK will not be subject to Recall Safe. Also, HA GAIN GANG will operate according to the setting prior to the recall operation. These are included in ALL. • If the unit or card type is changed when a new scene or unit library is recalled, the Recall Safe setting of that unit will be defeated. 3 4 3 SET ALL When you click this button, the SAFE PARAMETER SELECT button of the corresponding parameter/unit will be turned on for all channels. If the SET ALL button is on, even units not displayed in this screen will all be set to Recall Safe. Be aware that units not currently patched and units that are patched to Insert will also be affected. 4 CLEAR ALL When you click this button, the SAFE PARAMETER SELECT button of the corresponding parameter/unit will be turned off for all channels. 5 OTHERS Using these buttons, elements other than the above channel parameters can be selected for Recall Safe status. The following parameters can be selected. • DCA 1-12 DCA groups 1-12 • GEQ 1-24 Graphic EQ modules 1-24 • EFFECT 1-8 Internal effects 1-8 • MUTE MASTER...... Turn all mute groups on/off Recall Safe is not possible for GEQ and EFFECT when an individual library is recalled. It is not possible to specify Recall Save individually for mute groups 1-12. For parameters like those listed below of which there is only one for a pair of two adjacent odd-numbered → even-numbered channel, Recall Safe will be valid only if Recall Safe is set for both channels. • HA GAIN GANG • HA A/B LINK • GATE LINK • COMP LINK • DELAY GANG • PAN MODE • GEQ LINK Hint In the case of two paired channels, a ST IN channel, or the STEREO A/B channels, all settings that are set to Recall Safe will be linked for both channels. • Recall Safe is not possible if a scene is recalled during PREVIEW. • If Recall Safe is specified for either (not both) the odd-numbered or even-numbered channel of two channels, and you recall a scene in which these two channels are paired, pairing will be forcibly defeated, and the channel that was set to Recall Safe will maintain the state prior to the recall. • For channels in which the SEND parameter is set to Recall Safe, VARI PAN LINK will forcibly be defeated when a new scene is recalled. • If you specify Recall Safe for channels whose pairing settings would be modified by a scene recall, the SAFE PARAMETERS of both paired channels will be forcibly handled as "ALL." • If a MIX channel that is set to Recall Safe has a different mix type (VARI or FIX) before and after a scene recall, the mix type prior to the recall will remain valid. 5 24